Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cranksets

Black Ops One Piece Crankset
$34.99
- One-piece chromoly crankset - 24TPI - Length: 175mm - Weight: 997g
Campagnolo Centaur Crankset
$237.00
Many top features are packed into the Centaur crankset. The four-arm design allows for independent bolt circles, offering greater stiffness and structural integrity, and also provides additional versatility, as a single crankset is compatible with both standard compact and semi-compact chainrings. Add these features to the first aluminium crankset with an Ultra-Torque axle and the result is a component that is very similar to the top-of-the range part. - Requires use of Ultra-Torque bottom bracket cups-Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - Ultra-Torque system have both drive and non-drive side bearings pre-installed
Campagnolo Chorus 12-Speed Crankset
$408.00
The Campagnolo Chorus 12-Speed Crankset features lightweight carbon crank arms, and is optimized for Campagnolo's Ultra-Torque crank system. - Utilizes Campagnolo's Ultra-Torque crank system to provide a very lightweight and stiff system that transfers power to the pedals without power loss - Directly molded unidirectional carbon fiber cranks, steel axle, and aluminum chainrings provide exceptional stiffness and optimum power transmission - Symmetrical teeth on the internal chainring allow for fluid and precise transmission, even with extreme cross-chaining - Chainrings are surface-treated for longer life - Q-Factor: 145.5mm - Design is optimized to run multiple chainring combinations - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 96 - Pedal Spindle: 9/16" - Crank Intended Use: Road - Drivetrain Speeds: 12 - BB Included: No - Weight: 686
Campagnolo Record 12x2 Speed Crankset
$555.00
The new Record 12x2 Speed crankset: a new hole-free design for the right-hand crank that optimizes aerodynamics. The new carbon fiber Record 12x2 Speed crankset with unidirectional finishing guarantees continuity with the finishing of the entire groupset, whilst maintaining the Ultra-Torque bracket system on the steel axle to ensure perfect transmission of power. The new Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters without affecting the Q factor that remains constant at 145.5 millimeters. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) enable reducing the weight through greater use of carbon fiber. There are eight fixing screws for increased structural stiffness. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
Easton Chainring Bolts
$16.99
- Chainring bolts for double cranks - Torx heads
Easton EC90 SL Spider and Ring Assembly
$149.99
The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum
Easton Spider & Ring Assembly
$149.99
Easton spider and ring assemblies for CINCH cranks.
FSA BB30 Crank Bolts
$13.99
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
FSA BROSE Crankarms
$42.99
FSA BROSE eBike replacement crankarms.
FSA Bafang Crankarms
$56.99
FSA CK-603 crankarms for Bafang equipped eBikes. - Bead blasted anodized finish
FSA Energy Modular BB386EVO Crankset
$269.99
The latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Hollow forged arms - Forged AL7050 BB386EVO spindle - Direct mount outer chainring and 90 BCD inner chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs - Spindle Interface Type: 386 EVO - Chainring BCD: 90, Direct Mount FSA - Pedal Spindle: 9/16" - Crank Intended Use: Road, Gravel - Crank Length: 170mm - Rings: 46/30 - Drivetrain Speeds: 11 - BB Included: No - Weight: 755
FSA SL-K BB392 Tandem Crankset
$382.99 - $543.99
The FSA SL-K carbon tandem cranks feature an asymmetrical modular compact 2 x 11-speed spider, 30mm spindle, and tons of adjustability. - Hollow carbon arms with UD carbon finish - Asymmetrical 110 A.B.S BCD achieves 4 chainlines (44,47,50,53) - English BB included - 104 BCD timing spider - 653 grams - Number of Chainrings: Single - Crank Intended Use: Tandem - Pedal Spindle: 9/16" - Rings: 38 - Spindle Interface Type: 392 EVO - BB Included: English
FSA SL-K Modular BB386EVO Crankset
$420.00
SL-K modular BB386EVO is the latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Hollow carbon fiber arms with UD finish - Forged AL7050 BB386EVO spindle - Direct mount outer chainring and 90 BCD inner chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems
FSA K-Force WE Crankset
$531.99
This Hollow Carbon Crankset features reduced weight, and excellent stiffness. The K-force WE system is perfect for triathlon and/or time trial riders who want advanced technology without the bulk. - Lightweight hollow carbon arms with UD carbon finish - Maximum frame compatibility with a forged AL7050 BB386EVO spindle - Innovatively designed for a better ride, the variable thickness means that it’s reinforced at critical stressed areas and reduced in other areas for lighter weight - Chainring pins are AL7075 forged then 100% CNC 3D machined, to increase outer chainring stiffness and provide efficient up-shift pin design for full-power performance - AL7075 Torx T-30 alloy chainring bolts - Number of Chainrings: Double - Crank Intended Use: Road, Tri - Pedal Spindle: 9/16" - Rings: 50/34 - Spindle Interface Type: 386 EVO - Drivetrain Speeds: 11 - Chainring BCD: 110 - Weight: 534 - BB Included: No
Kink Pillar 24 Crank Bolt
$6.99
Replacement spindle bolt for Pillar 24 cranks (24mm spindle) - Thread: M18 x P1.0
Kink Pillar Crank Bolt
$6.99
Replacement spindle bolt for 22mm Pillar Cranks. Tightens with 8mm Allen Key.
Kink Eastman Guard Sprocket
$49.99
The Kink Eastman full guard sprocket was designed to take a beating, and its built-in guard will protect your chain in the process. The machined crank arm reliefs create proper clearance for all popular cranksets, and the guard offset accommodates all chain widths, which gives the Eastman sprocket maximum compatibility. Its technical design creates a clean and symmetric aesthetic and provides massive strength where it’s needed. Two rotation positions extend the life of the Eastman’s built-in guard even further. - Material: Fully CNC Machined 6061-T6 Aluminum - Thickness: 12.5mm Overall (8mm at Spindle) - Compatibility: 19mm, 22mm, and 24mm Spindles - Weight: 5.3oz (25T)
Kink Pillar 24 Cranks
$169.99 - $179.99
As the name implies, the Pillar 24 cranks are our 24mm version of the proven Pillar cranks. In addition to a much improved strength-to-weight ratio, the 24mm (23.8mm) spindle means sprockets mount directly without the need for added adapters. The Pillar 24 cranks use the same exclusive single-piece forged backplate found in the original Pillar cranks that tie together the pedal and spindle bosses. Acting as an extremely stiff backbone to each crank arm, this design eliminates several weak points found in traditional tubular cranks. The Pillar 24 cranks also feature a two-piece, hydraulically pressed spindle-to-arm design and a heat-treated hollow chromoly spindle. TECH SPECS - Length: 170mm and 175mm - Spindle Size: 24mm Hollow - Spindle Type: 48-Spline - Drive Side: RHD/LHD Compatible - Drive Type: Regular and Micro Drive Sprocket Bolt Bosses - Tubing: 100% 4130 Chromoly Steel - Heat Treatment: TruTherm Post-weld Heat Treated - Particulars: Unique One Piece Forged Backplate - Weight: 28.5oz (175mm)
Kink Pillar Cranks
$169.99 - $179.99
The Kink Pillar cranks use a unique, one-piece forged backplate that tie together the pedal and spindle bosses, while acting as an extremely stiff backbone to each crank arm. This design eliminates several weak points found in traditional tubular cranks and increases the overall strength without adding weight. The Pillar cranks also feature a two-piece, hydraulically pressed spindle-to-arm design, and a heat-treated hollow chromoly spindle. TECH SPECS - Length: 170mm and 175mm - Spindle Size: 22mm Hollow - Spindle Type: 48-Spline - Drive Side: RHD/LHD Compatible - Drive Type: Regular and Micro Drive Sprocket Bolt Bosses - Tubing: 100% 4130 Chromoly Steel - Heat Treatment: TruTherm Post-weld Heat Treated - Particulars: Unique One Piece Forged Backplate - Weight: 28.5oz (175mm)
MRP 1x V3
$74.95
The 1x guide is the definitive cross-country chainguide. Used on the World Cup circuit and even in the 2012 London Olympics, the 1x has a proven track record of dependability and performance. The 1x is the perfect guide for riders and racers wanting a lightweight single-ring front drivetrain for cross-country use or riders wishing for more security out of their "narrow/wide" or XX1/X01 setups. Freshly updated for 2015 with the new co-molded "TR" upper guide - lighter and quieter, what's not to love? - Adds security to "narrow/wide" 1x10/11 and XX1/X01 drivetrains - Most models accommodate 26-38t chainrings - Tracked and grooved upper guide / backplate interface increases stiffness and eases installation - New co-molded "TR" upper guide with softer durometer interior for silent guidance - All install and adjustment operations possible with just a single 4mm HEX wrench. - BB mounted guides are only compatible with traditional, threaded BB systems
MRP AMg V2 Alloy
$119.95
Designed for enduro and trail riding, the AMg V2 Alloy chain guide features an upper guide for chain security and an integrated skid to protect the chainring and frame. - Compatible with 1x9, 1x10, and 1x11 drivetrains - Integrated nylon skid glides over rocks - Softer co-molded upper for quiet operation - Installs and adjusts with a single 4mm hex - Compatible with chainlines 49mm and wider - Tracked and grooved upper guide and backplate increases stiffness
MRP AMg V2 Carbon
$169.95
The newly redesigned All-Mountain Guide is the love child of two innovative and revered product lines, the 1x and XCg. Perfectly suited to the increasingly popular all-mountain segment, the All-Mountain Guide shares the freshly updated "TR" upper guide with the 1x, and adds MRP's patented integrated skid. The All-Mountain Guide is a great choice for 5-6" travel bikes when used with the latest tensioned rear derailleurs or on its own for shorter-travel trail bikes or hardtails that require bash protection. The contact-free, "upper-only" chain retention means the All-Mountain Guide will be virtually silent and completely drag-free when pedaling. The patented integrated skid will protect your crank and chainring and prevent the chain from ever contacting and potentially damaging your expensive frame. - Perfect for "clutched" 1x10 and 1x11 drivetrains, as well as those using chain-retaining rings (like our Wave Ring) - New nylon integrated skid protects chainrings and glides over rocks and obstacles - Tracked and grooved upper guide / backplate interface increases stiffness and eases installation - New co-molded "TR" upper guide with softer durometer interior for silent guidance - Available in 28-32t and 32-38t sizing - All install and adjustment operations possible with just a single 4mm HEX wrench. - Compatible with chainlines 49mm and wider
Mission BMX Sprocket Crank Arm Bolt Profile
$2.49
Sprocket bolt for mounting sprocket on a crank arm. The low-profile head design works with 22T sprocket sizes and up. Installs with 6mm allen key. Product Specifications - Fits: All Standard Sprockets - Type: Profile Cranks (3/8" x 24tpi Thread) - Weight: 0.4oz
Mission BMX 8-Spline Crank Spindle
$9.00
19mm, 8-spline, cold-forged chromoly replacement spindle. Works with Mission Transit cranks and most other 8-spline cranks. Includes two spindle bolts. Product Specifications - Size: 19mm - Spline: 8-Spline - Length: 150mm - Material: Chromoly - Includes: Spindle and Bolts - Weight: 11.5oz
Mission BMX 48-Spline Crank Spindle
$23.99
19mm, 48-spline, cold-forged chromoly replacement spindle. Works with most OEM 48-spline cranks. Includes two spindle bolts. Product Specifications - Size: 19mm - Spline: 48-Spline - Length: 140mm - Material: Chromoly - Includes: Spindle and Bolts - Weight: 9.2oz
Origin8 Track/SS Crankset
$79.99
Origin-8's Track/SS Crankset is made of light and durable forged aluminum. It has a fine machined-aluminum 46-tooth chainring for super-smooth pedaling and comes in a variety of colors to make your bike the coolest ride on the block.
Promax SQ-1 Crank Arms
$79.99
Promax SQ-1 Crank Arm sets more than cover your need for hard-to-find lengths and hard-to-miss colors. - BCD: 110mm - Weight: 25.2 oz.
Promax CF-2 Crank
$149.99
Promax's CF-2 BMX Crankset features cold-forged 6061-T6 aluminum arms, a 2-piece design, and included external bottom bracket. - BCD: 104mm - Spindle diameter: 24mm
Promax HF-2 Crank Set
$299.99
Promax HF-2 BMX Cranksets are Promax’s top-of-the-line crank offering. Hollow-forged from 6061-T6 aluminum, both crank arms are hollow so they are super-stiff, yet lightweight. The crank arms spin on a beefy 24-millimeter spindle permanently fitted into the drive-side arm. - Bottom bracket sold separately - Pedal washers included - Meets or exceeds ENBMX standards - Chainline: 43mm - Q-Factor: 167mm - BCD: 104mm - Weight: 29.5 oz.
Page 1 of 6 Next page