Tools/Maintenance

Torque wrenches are an essential bicycle tool. The increase in carbon fiber bikes and components have driven this need. While carbon fiber allows for more optimal design and provides higher strength to weight ratio compared to steel and aluminum, it is also more susceptible to crushing and cracking when improperly set up. Pedro's Fixed Torque Drivers are shop quality preset torque wrenches designed with an infinite torque-limiting clutch design to eliminate over-torquing of critical parts. Each wrench is calibrated using a torque calibration analyzer accurate to +/- 1% and is then tested 5 times prior to packaging with results recorded on the product card along with the date. A magnetic socket drive accepts standard 1/4" hex bits and 4mm, 5mm, and T25 bits are included with each wrench. The ergonomic handle design provides comfort and control ready for daily use while also storing two extra bits. - Infinite torque-limiting clutch design eliminates over-torquing - Magnetic socket drive accepts standard 1/4" hex bits. 4mm, 5mm, & T25 bits included - Ergonomic handle design provides comfort and control and stores extra bits

One of the only bits of maintenance an internally geared hub needs is occasional oiling. Using the proper oil is essential, and, if you have a Shimano Alfine hub, you've found the right stuff. - Mineral oil based lubricant specifically for the Alfine 11-speed hub

Aqua Proof Paste is the magic goop for installing bottom brackets and keeping them quiet. In the Kogel office, it's known as 'Shut up Grease'. Aqua Proof was developed by Morgan Blue from Belgium for the offshore industry. It's saltwater resistant, does not degrade over time, and is a long-time favorite of the UCI world tour mechanics. It works on any pressed or threaded surface to avoid corrosion. You'll find yourself using it for a lot more than just installing bottom brackets. The 5ml size is for a single bottom bracket installation, the 200ml jar will last a long time, even for professional use. - Recommended for all bottom-bracket installations - Also works on thread and headset installation - 5ml syringe is enough for a single installation - 200ml jar for shop use

Updated to fit an even wider range of hub, wheel and tire combinations with room to spare, utilizing a wider base structure and larger calipers. More accurate and easier to calibrate, the versatile TS-4.2 is solidly built to accurately self-center nearly any diameter wheel 16-inch to 29+ and any tire width up to 5-inches+. - Both uprights move simultaneously to always keep wheel centered in the stand - Accommodates tire widths up to 5-inches+ with or without brake rotor mounted - Speed knob to quickly change axle widths - Accommodates hub widths from 75mm to over 250mm - Precise operation and adjustability - Built in thru-axle adaptors - Machined, welded, assembled and calibrated in our factory in St. Paul, MN - Chrome plated and powder coated heavy gauge steel construction - Removable, replaceable nylon caliper tips to protect painted/anodized rims

- Zyklop socket with 3/8 inch drive and holding function - "Take it easy" Tool Finder with color coding according to size

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

The Muc-Off All-Weather Chain Lube is a high-performance synthetic lubricant. The unique water repellent, non-fling formula penetrates deep into the chain link, to create a durable protective coating which guards against corrosion metal-to-metal wear. A unique blend of extreme pressure additives ensures the lube can stand up to even the toughest of rides. Muc-Off's formula provides lubrication for long-distance, on & off-road riding in all conditions. - Ideal for MTB, Road, Cyclocross and Commuting - Suitable for use in all weather conditions - Added protection against contaminants - Provides smooth and quiet gear shifting - Reduces friction and improves efficiency - Derived from renewable sources - Can be applied to chain, cables, shifters, derailleurs, pedals & cleats - Pipette system for easy application - Readily Biodegradable* - Integral UV tracer dye - aids accurate application to ensure total protection. *Only contents are readily biodegradable.

When we launched Secret Chain Lube, Josh admitted that the starting point for this product was a hot wax recipe he had used for years with pro teams that had won numerous world and Olympic medals. The idea behind Secret Chain Lube was to bring this technology to a lube that didn't require hot melting, but it turns out many of our customers were already big fans of hot waxing chains, and the requests flooded in for us to release the SILCA Secret Wax Blend...so here it is! Consisting of highly refined laboratory-grade paraffin and a high concentration of 3 specific sizes of nano-scale Tungsten disulfide, Secret Chain Blend not only acts as a lubricant but actually acts to modify the surface of the chain, filling in all of the crevices of the metal with highly lubricious and wear-resistant tungsten disulfide particles. As a result, chains waxed with Secret Chain Blend and Secret Chain Lube will actually get faster over time and after repeated waxings. Secret Chain Blend is the only hot wax lubricant to have a specifically matched and compatible drip wax that can be used to 'top off' the wax as needed, extending the duration between hot wax applications, and guaranteeing the quietest running drivetrain possible. Using the combination of Secret Chain Blend and Secret Chain Lube can dramatically extend the chain and drivetrain component life (up to 10x). - 500g / 17.6oz pouch - The chain should be VERY clean and dry before applying

The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or MATTONE. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Nove (No-vay) 9 forged and plated tools: Hex 2/3/4/5/6/8 +Torx 25 +PH2/Flat - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - NOVE- 79 grams

The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or Seat Roll Premio. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Tredici (Tre-dee-chee) 13 forged and plated tools: Hex 2/2.5/3/4/5/6/8 + Torx 10/20/25 + PH2/Flat + DiscPadSpreader. - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - 98 grams

Eliminate brake pad and rotor rubbing by using our updated Rotor Truing Fork 2.0 to keep any brake rotor perfectly true. Compact, portable, and lightweight, yet comfortable and effective to use thanks to the strong steel core and overmolded grip. With two different tuning depths for repairing shallow and sharp deformations, this is the ideal solution for truing disc brakes on road bikes, mountain bikes, electric bikes, urban and ?tness bikes.

Lezyne's Chain Drive chain tool is constructed from chromoly for strength and reliability. Its ergonomic shape gives you a comfortable surface to grip while trying to knock out those stubborn 9/10-speed chain pins. Plus, it boasts four integrated spoke wrenches including Road and MTB Mavic Splined, 3.22, and 3.45 for extra versatility.

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

Clean bikes run smoother and perform better. Finish Line's Premium Bike Care Value Pack is a 3-pack of their best-selling products: Multi Bike Degreaser, Dry Teflon Bike Lube, and Super Bike Wash Concentrate. These three 4-ounce bottles make it easier than ever to keep your ride in premium shape.

- Clean and long-lasting performance in dry to mixed conditions. - Elevates efficiency, runs quiet, reduces wear, and repels water and grime. - Safe plant-based ingredients. Formulated with Pedro's exclusive CleanTech Chemistry, X Dry uses advanced polymer technology that dries to a unique semi-fluid film and provides clean and long-lasting performance in dry to mixed conditions. Noticeably elevates efficiency, runs quiet, reduces wear, and repels water and grime. Also fantastic for use on derailleurs, shifters, cables, and brake pivot points. CleanTech Chemistry is a proprietary approach to chain lubrication chemistry developed by Pedro’s to achieve new standards of performance using ingredients that are safe for mechanics and riders. Chain lubes commonly feature toxic ingredients that are unsafe for the user and harm the environment. With CleanTech Chemistry, there are no compromises. CleanTech Chemistry lubes share a similar base chemistry but each employs a unique lubricant package designed to optimize the chain surface coating characteristics and maximize performance for the intended riding conditions, while keeping the drivetrain exceptionally clean.

This lightweight chainwhip is strong enough to be your go to chainwhip, but light enough that you won't need to leave it at home when on the move. - Compatible with any cassette up to and including 12 speed cassettes - Design and manufactured in Minneapolis, MN USA - 7075-T6 Aluminum

Dial Indicator Set bolts directly to the DT-3 allowing for greater accuracy and a way to measure results. Now includes an elongated, cylindrical tip that is large enough to work around voids in most rotors.

Frame and Fork Taps will become a lifesaver at some time for virtually every mechanic. These taps are made of high-carbon steel and are precision ground. Park Tool Frame and Fork Taps cut easily and fit conventional tap handles.

The Pro Saw Guide's full metal construction delivers straight, precise, and clean cutting of all threadless steerer tubes from 1" to 1.5", handlebars, and many sizes of seatposts. The efficient design provides a balance of simple form and good work-piece visibility, while also providing secure hold and precise alignment. - Full metal construction with aluminum jaws and hardened steel guide plates for straight cuts every time. - Fits tube sizes from 19mm to 39mm (0.75" to 1.5"); everything from handlebars to 1.5" steerers. - Laser etched sizing scale provides quick reference of jaw position. - Easily set slot width for standard or carbon blades by moving spacer plate position.

Innovative concealed mountain bike multi-tool that discretely and securely inserts into a handlebar opening. It's constructed from lightweight and durable machined aluminum and features hardened-steel tool bits. The kit is easily accessible for quick bicycle repairs and serves as a bar end on your mountain bike.

- A multi-tool that includes a tubeless tire repair kit - 18 individual tools 22.5345mm hexes T25 Torx wrench stainless steel reamer knife plug tool and air stop - Also includes three 5mm thick tire plugs and integrated storage compartment - Vanadium s

The Park FR-6 Freewheel Remover fits most 4-notch BMX and singlespeed freewheels. It can be held with a wrench or vise and its narrow profile allows use without removal of cones and locknuts.

The Finish Line Absorb-It Mat is the perfect way to keep any work area clean. Designed with special absorption fiber technology, the Absorb-It Mat absorbs and traps chain lubricants, cleaners, degreasers, brake fluid and hydraulic oils. The combination of absorption fibers and a leak-proof poly liner make the Absorb-It Mat perfect accessory when degreasing & lubricating bicycle chains. Use the Absorb-It on a work bench, under an automobile to catch leaking fluids, in a car trunk to prevent stains, in a chemical storage cabinets, or under a trainer to catch perspiration. The Absorb-It Mat comes in two different sizes: Small (48" X 18") and Large (60" X 36"). The 48" x 18" will absorb and trap up to 11L of fluids. The larger 60" x 36" will absorb and trap up to 2.5L of fluid. Both mats can be cut with a scissor to fit in custom areas.

Professional quality component hex driver precisely machined to exact standards to ensure a perfect fit on compatible component fasteners. Featuring an ergonomic, CNC machined, perfectly balanced 6061 aluminum handle hard anodized to take the rigors of everyday use.

Finish Line's Mineral Brake Fluid is formulated specifically for bicycle brake systems requiring mineral oil. Features no compromise leading edge chemistry to provide superior fluid life and braking performance. Formulated with a low viscosity base oil to yield superior level response, pad retraction, and consistent performance through a full range of operating temperatures. Finish Line Mineral Brake Fluid was specifically engineered for use in bicycle hydraulic disc brake systems. When you are serious about getting the most out of your braking system, Finish Line Mineral Brake Fluid is a great choice. - Specifically engineered for use in bicycle hydraulic disc brakes - Provides maximum fluid life and braking performance, even at low temperatures - Prevents foaming and overheating

Wet Lube is typically recommended for extreme conditions. Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives. Wet Lube is Finish Line's strongest, longest lasting and most water resistant lubricant. Wet Lube goes on wet, and stays wet, to provide maximum drivetrain smoothness, extremely quiet rides, and ultimate rust protection in the harshest of environments. If you use Wet Lube for riding off-road or in dry climates, be sure to wipe the excess from parts to minimize the attraction of dirt and grime. Since 1994, when Wet Lube was first introduced, it has become the preferred lubricant for many professional on and off-road teams around the world. Use Wet Lube when you ride hard and long. Proven performance for 100-plus mile rides, muddy off-road conditions, long rainy commutes, and foggy salt-air coastal climates. A heavier, wet-style lubricant that requires a little more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection.

Help your bearings run smoother and longer with Finish Line's Ceramic Grease. Its special blend of ceramic particles, Teflon and synthetic oils helps lube your bearings and dissipate heat, guaranteeing longer life and better function. Plus, it works great on stems, posts, cables and other threaded assemblies, too. - Optimizes performance and efficiency of bottom brackets, hubs and headset bearings - Use on stems, seat posts, cables and any threaded assemblies - Prevents rusting even when exposed to salt water - Clear and non-staining

High-quality Kraftform Plus screwdriver. The ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. - Kraftform Plus: hard gripping zones for high working speeds, while soft zones ensure high torque transfer - Hexagonal ball point screwdriver - Multi-component Kraftform handle for fast and ergonomic screwdriving - "Take-it-easy" tool finder: color coding according to profile and size - Hexagonal blade and ballpoint for secure working even in difficult installation situations - The Wera Black Point tip offers an exact fit and optimum corrosion protection

Click-Torque wrench in the unmistakable, robust Wera design with high accuracy. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. For right-hand use (clockwise torque control) and with 45-tooth reversible ratchet mechanism. - With 1/4" square drive, reversible ratchet, 45 teeth - Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values - Audible and tactile release mechanism when the set torque value is reached - Measuring range: 2.5-25 Nm; Precise to +/- 4% - Designed with ergonomic 2-component handle suitable for right-hand use

High-quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. "Take-it-easy" Tool Finder: color coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. - Hexagonal screwdriver hex-plus - Multi-component Kraftform handle for fast and ergonomic screwdriving - Take-it-easy tool finder: color coding according to profile and size - Hex-plus allows socket head screws to live longer - Hexagonal anti-roll feature against rolling away

Handle/interchangeable blade system for fast replacement. Short handle for hard-to-reach areas. Suitable for the mounting of bits with 1/4" hexagon drive. - Handle/Interchangeable blade system for rapid exchange of the blade - Stubby bit hand holder: short compact shape for working in confined spaces - Ergonomic 2-component Kraftform handle for precise work - Take-it-easy tool finder: color coding according to profile and size - Compact, textile box with high robustness, low weight and volume. Suitable for docking with the Wera 2go system. - Bits with BiTorsion zone to cushion load peaks

Shimano Genuine disc brake bleed Funnel unit for BL type MTB brake lever (M5 thread bleed port) Features: - Oil spill guard lid with an integrated oil stopper holder - Funnel base - Bleeding instructions available for download under 'Documents & Links' below

Portland Design Works' 3wrencho is a strong and versatile addition to your fixed gear, townie or workbench! Made of heat-treated steel for extra toughness, it's part tire lever, part 15mm wrench. Its strong nylon coating won't scratch rims, so you can pry as hard as you need to remove stubborn tires. Step on the 3wrencho for extra leverage to loosening axle nuts. May also be used to spread peanut butter, stir a drink, or open a letter. - Length: 114 mm (4.5") - Weight: 95 g (3.5 oz)

- Heavy-duty device that cleans chain in seconds - The kit includes a 75 ml bottle of Drivetrain Cleaner that can be either sprayed over the drivetrain or poured into the top reservoir - Liquid release button ensures the application of the cleaner is quick and easily controlled. - Abrasive cleaning teeth and rotating brush wheels which have 120 contact points cover every part of each chain link for a deep and thorough clean - Excess dirty fluid drops into a second lower reservoir so it’s kept away from the clean chain

- Three brush heads featuring tough nylon bristles and an integral scraper for mud de-clogging - Ideal for chain, cassette and sprockets - 10-speed compatible

Silicon Shine not only leaves your bike looking factory fresh, but it also acts as an amazing friction reducer for suspension parts and reduces dirt adhesion. Spray it onto your fork stanchions and rear shocks to reduce resistance for a silky smooth, World Cup performance. - Protects and leaves a sparkling shine on metal, plastic & rubber parts - Reduces friction on fork stanchions and rear shocks - Silicon formula prevents grime build up on treated surfaces - Cuts down on future cleaning and maintenance

- Cut hydraulic disc brake hoses - Set connector insert to hoses - Adjustable hose clasping power - Compact size for easy storage - Spare blade included

Our first multi-tool includes all the key bits to assemble and disassemble your bike on-the-go. Includes a 15mm and 17mm swappable pedal wrench, 4, 5, 6 and 8mm hex wrenches and a 17mm socket with an integrated storage compartment. The Travel Tool is light and easy to carry, but big enough to allow you to actually tighten everything down properly. Features: - 4mm, 5mm, 6mm, and 8mm hex wrenches - 17mm deep socket - Integrated storage compartment - Pedal Wrench (15mm and 17mm spanners included) - 8-inch Full length arm for proper leverage

- Ultra durable, long distance chain lubricant - Excel in long distance wet or muddy conditions - It penetrates deep into the chain links core to provide long lasting lubrication and total protection - Extreme pressure additives coat every part of the link to provide silky smooth gear change and ultra efficient drivetrain

- Used to install fork dust seals

Showroom™ Polish & Protectant with Ceramic Technology delivers maximum luster, it repels water, and prevents grime buildup. Your bike and components will stay clean for longer intervals. Showroom is safe for use on clear coat, carbon fiber, aluminum, titanium, steel, chrome, and stainless steel. Simply spray on and let sit for 10 seconds. Then wipe off with a clean rag. Due to Showroom’s proprietary formulation there is no need to pre-wash the bike. Enjoy the shine! Showroom Polish & Protectant will: - Clean frames and components without a prewash - Protect the bicycle from water and perspiration - Prevent a buildup of grit and grime - Keep your bicycle looking new

Compact, easy-to-use-and-read torque wrench provides correct tightening of bolts on frame and component bolts to recommended torque values for safety and performance. Two of your favorite bits can be carried in the handle of the Nano TorqBar X for immediate use and even greater portability during rides. Torque range: 2 – 6 Nm.

Topeak's LineUp Stand securely holds your bike by the rear wheel for storage or display. Its spring-loaded arm automatically adjusts to fit wheels from 20-inches to 29-inches in diameter. Use it at home to store your bike, or use it to hold your pit bike at your next cross race!

The majority of bicycle maintenance is delicate, precision work. But occasionally, getting the job done requires maximum leverage and control. The 8 and 10mm L-Handle Allen Wrench Tools are designed to create optimal torque for pedals and cranks. With an extra deep contact arm, long lever arm and ergonomic handle, having great control during high-torque moments is reassuring. These Allen wrenches also have a convenient ball end for quick turns of a bolt.

- 120 gram, 7-function shop quality folding tool with 2.5, 3, 4, 5 and 6mm hex wrenches and flat-blade and #2 Phillips screwdrivers. - Super strong composite body features new design with improved comfort, increased leverage, and stay-tight bolt design. - Professional-grade tool steel wrenches feature superior anti-corrosion finish for unmatched lasting performance. Pedro's folding wrench sets are essential for the shop, event, ride, and at home. These folding wrench sets feature professional grade tool steel for strength, superior anti-corrosion finish for unmatched lasting performance, and body made of lightweight but super tough composite material. The new body features improved ergonomics, shaped to perfectly fit in your hand, allow easy access to each tool, and with extra length for better leverage and control. In addition, the new stay-tight bolt design keeps tool bits from loosening over time. Backed by Pedro's lifetime warranty.

Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Adjustable Linkage model, which feature's replaceable rubber jaws; fits seatposts and frame tubes from 1 to 1 5/8-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.

Park's Dial Indicator Gauge Set mounts to their TS-2 or TS-2.2 Truing Stand (sold separately). The set makes it easy to view and correct a wheel's lateral and radial run-out within a tolerance of .01mm. Compared to going by the gap between the truing stand pointer and rim, having gauges that put a number on the clearance makes wheel truing easier and more accurate.

Accurately gauge the straightness of disc brake rotors while the wheel is mounted in a TS-2.2 or TS-2 Professional Wheel Truing Stand (each sold separately). Park Tool's Rotor Truing Gauge features an infinitely adjustable, finely threaded indicator gauge. It works with any diameter brake rotor.

Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread. Note: It is very important to have sharp and accurate cutting tools for effective tapping and thread-chasing. Using an excessively worn or damaged tap can cause permanent damage to the frame and/or bottom bracket.

World-famous Park Tool quality wrapped up in a great set of metric combination wrenches. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip.

World-famous Park Tool quality wrapped up in a combination metric wrench. Features both open and 12-point two-way ratcheting box ends. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful!

Wall- or pegboard-mounted holder designed specifically for our P-Handle Torx Compatible Wrenches. Positions wrenches for easy access with easy to read size designation for each tool. Tools sold separately.

Ideal for wheel truing when there’s limited access to spoke nipples such as small, high spoke count wheels or while using an anti-rotation spoke holder. The SW-9 combines two common spoke nipple sizes, 0.127-inch/3.23mm (SW-0) and 0.136-inch/3.45mm (SW-2). Forged, machined, heat-treated, plated and vinyl-dipped for years of dependable use.

Includes a new tray/motor shroud, USB ports and oversized buttons to upgrade a Park Tool PRS-33 or PRS-33 AOK into the PRS-33.2 version controls and electronics.

They always say, the right tool for the right job. Park's P-handled Torx Wrenches are available in T6, T8, T10, T15, T20, T25, T30 and T40 sizes. They feature offset handles made from durable nylon with a comfortable, ergonomic design. The wrenches are made of high-torque industrial steel for excellent durability.

Park Tool's 238K Caliper Upgrade Kit will upgrade the TS-2 Professional Truing Stand to accept wider wheels and tires to increase the versatility of your TS-2 truiing stand. The set includes left and right caliper fingers, and one pair of the plastic removable tips. NOTE: The 238K will not allow the wide 29er wheels with plus-sized tires to be trued in the older TS-2 stands. Use the upright extensions TS-2EXT.2 to for truing 29er wheels with plus-sized tires.

A great way to keep the benchtop organized during a repair, the OM-2 features an over-sized textured work area and raised trays for organizing small parts and hardware. Perfect for overhauling or rebuilding components such as forks, shocks, hubs, suspension linkages, derailleurs, etc. - Measures 15 x 24.5-inches (38cm x 62cm) - Interlocking edges allow multiple mats to be joined together - Tear/abrasion/shock-resistant TPR construction