Filter By:
- Parts & Accessories (260)
- Wheels (222)
- Hubs (74)
- Rims (81)
- Spokes (12)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Wheels
$20.00
Hub End Caps for Go-Devil Hubs. Caps for quick release, 12mm, and 15mm available.
$30.00
Rear Thru Axle conversion kit for Go-Devil Hubs
- Converts QR to 142x12mm thru (axle not included)
$75.00
- 11 Speed Freehub Body for Shimano and Sram Cassettes
- XD Driver for SRAM Cassettes
- 11 Speed Freehub has 28 points of engagement
- XD Driver has 56 points of engagement
- Fits Go-Devil Hubs
$85.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical.
We've ridden them on all kinds of bikes from mtb to road and we're in love. They are reliable, dang light and very reasonably priced.
We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release, 12mm, and 15mm endcaps are included.
On all models we spec high-quality made in Japan stainless-steel sealed bearings.
Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity in our modern world.
- Weight: Disc Brake: 164g
- Includes 12mm, 15mm endcaps and quick release skewer
- Non-Drive Side Center To Flange Disc Brake: 21mm
- Drive Side Center To Flange Disc Brake: 36mm
- Non-Drive Flange Diameter Disc Brake: 58mm
- Drive Side Flange Diameter Disc Brake: 45mm
$85.00
New Sheriff hubs are the ultimate in track racing hubs. They minimize weight with larger cutouts in the flanges, lightened axles, shorter bolts, and slimmer end caps than previous versions. The result is a hubset that weighs a mere 432g, 198g for the front, and 234g for the rear. This makes it one of the lightest track hubsets in the world, a figure even more impressive when you consider that All-City didn't eliminate the usefulness of a fixed / fixed or fixed / free option as most racing hubs do.
They feature the finest Japanese manufactured 6902 bearings which roll incredibly fast and smooth while retaining excellent seals for all weather, all-day everyday durability.
Front hub specs:
- Weight: 198g
- Torque Spec: 33nm (25ft lbs.)
- Non-Drive Side Center to Flange: 34mm
- Drive Side Center to Flange: 34mm
- Non-Drive Side Flange Diameter: 62mm
- Drive Side Flange Diameter: 62mm
Rear hub specs:
- Weight: 234g
- Torque Spec: 33nm (25ft.lbs.)
- Non-Drive Side Center to Flange: 29mm
- Drive Side Center to Flange: 29mm
- Non-Drive Side Flange Diameter: 62mm
- Drive Side Flange Diameter: 62mm
$130.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical.
We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced.
We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included.
On all models we spec high-quality made in Japan stainless-steel sealed bearings.
The splined freehubs have 28 points of engagement, the XD driver has 56.
Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity.
- Weight: 277g
- Includes 12mm thru-axle end caps and quick release skewer
- Drive Side Center To Flange 18.5mm
- Non-Drive Center to Flange 34mm
- Non-Drive Flange Diameter 58mm
- Drive Side Flange Diameter 49mm
$6.99
CNC machined from 6061-T6 aluminum alloy, Box One Schrader Valve Caps add a touch of style to any bike. Available in anodized red, blue, and black with laser-etched Box logos.
$6.99
CNC machined from 6061-T6 aluminum alloy, Box One™ Presta Valve Caps add a touch of style to any bike. Available in anodized red, blue, and black with laser-etched Box logos.
Material 6061-T6 Aluminum
Weight 0.25 grams / 0.008 ounces
$59.99
The Box One Rims feature a double-walled, eyeleted, low-profile design optimized to be both lightweight and durable! We offer these in both brake and brake-less variants. You’ll have a clean and sleek wheel build with rim brake tracks as needed.
FEATURES
- Low Profile Design
- Optimized Internal Geometry
- Machined Brake Track
IMPORTANT NOTES
Brake-less variants do not have a brake track and therefore are not designed to be used with rim brakes! They are to be used as front or rear rims with disc brakes ONLY!
COMPATIBILITY
- Box One XS Mini Carbon 1" alloy steerer 20" x 10mm fork
- Box One Harmonic Expert Hubset 28h
- Box Three Expert Hubset 10mm 28h
- Box One Stealth Expert 10mm Front Hub 28h
- Box One Stealth Expert 10mm Rear Hub 28h
$59.99
The Box One Rims feature a double-walled, eyeleted, low-profile design optimized to be both lightweight and durable! We offer these in both brake and brake-less variants. You’ll have a clean and sleek wheel build with rim brake tracks as needed.
FEATURES
- Low Profile Design
- Optimized Internal Geometry
- Machined Brake Track
IMPORTANT NOTES
Brake-less variants do not have a brake track and therefore are not designed to be used with rim brakes! They are to be used as front or rear rims with disc brakes ONLY!
COMPATIBILITY
- Box One XS Mini Carbon 1" alloy steerer 20" x 10mm fork
- Box One Harmonic Expert Hubset 28h
- Box Three Expert Hubset 10mm 28h
- Box One Stealth Expert 10mm Front Hub 28h
- Box One Stealth Expert 10mm Rear Hub 28h
$59.99
The Box One Rims feature a double-walled, eyeleted, low profile designed and optimized to be lightweight and durable! Offered in both brake and brake-less variants, allows for clean and sleek wheel builds that only have rim brake tracks where they need to be.
FEATURES
- Low Profile Design
- Optimized Internal Geometry
- Machined Brake Track
IMPORTANT NOTES
Brake-Less variants do not have a brake track and are not designed to be used with rim brakes! These variants can be used as front rims or rear rims with a disc brake ONLY!
COMPATIBILITY
- Box One X2 Pro Carbon 1 1/8" cro-mo steerer 20" X 20mm fork
- Box One Quantum Hubset 36h
- Box Two 20mm Front Hub 36h
- Box Two 20mm Freewheel Hubset 36h
- Box Three Pro 10mm Rear Disc Hub 36h
$149.99
The Box One Stealth Expert Front Hub is designed to be light FOR lightweight riders, and features small hub flanges, lower spoke counts, and decreased material to keep the weight down. This makes the Stealth Expert Front Hub ideal for any Mini, Junior, or Expert wheel build, but may also accommodate a lightweight rider looking to move up to a pro-sized bike.
FEATURES
- Micro-Adjust Pre-Load Collar
- Lightweight Design
IMPORTANT NOTES
Warning: The BMX spec is optimized for even lower drag with unsealed bearing. They are designed to be ridden in dry conditions. If ridden in wet conditions you will need to service the internals after each event or riding session.
COMPATIBILITY
- Box One XS Mini Carbon 1" Alloy Steerer 20" x 10mm Fork Black
- Box One XE Expert Carbon 1” Alloy Steerer 20” x 10mm Fork
- Box One 24x1-1/8" 28-Hole Front Rim Black
- Box One 20X 1-1/8" 28-Hole Rim Rear Black
$349.99
The Box One Stealth Expert Rear Hub is designed to be lightweight for smaller riders and features small hub flanges, lower spoke counts, and decreased material to keep the weight down. Featuring our Stealth Technology adds instant engagement and silent low-drag coasting making it ideal for Mini, Junior, or Expert wheel build. Still, it may also accommodate a lightweight rider looking to move up to a pro-sized bike.
FEATURES
- Stealth Technology™
- Instant Power Delivery
- Low Drag Coasting
- Infinite Points of Engagement
- Silent Coasting
- Micro-Adjust Pre-Load Collar
$9.99
- Plastic spoke covers in a variety of colors
- 300mm cut to fit length
- 36 pieces - enough for one wheel
- Increases visibility and demands attention
$14.99
Replacement axles for Black Ops MX-1100 hubs.
Size: 3/8-inch x 100 x 140mm
- Supplier Part: KT-576F
- MPN: 370664
- Front/Rear: Front
- Diameter: 3/8-inch
- OLD: 100mm
Size: 3/8-inch x 110 x 152mm
- Supplier Part: KT-5V3R
- MPN: 370665
- Front/Rear: Rear
- Diameter: 3/8-inch
- OLD: 110mm
$239.99
- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes
- Black Ops MX1100 hubs with sealed bearings and laced with DT spokes
- 24mm inner rim width supports a variety of modern sizes
- OLD: Front: 100mm, Rear: 110mm
- Gears: Singlespeed freewheel
- Type: Tube only
- Size: 20-inch
$259.99
- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes
- Black Ops MX1100 hubs with sealed bearings and laced with DT spokes
- 24mm inner rim width supports a variety of modern sizes
- OLD: Front: 100mm, Rear: 110mm
- Gears: Singlespeed freewheel
- Type: Tube only
- Size: 24-inch
$259.99
- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes
- Black Ops MX1100 hubs with sealed bearings and laced with DT spokes
- 24mm inner rim width supports a variety of modern sizes
- OLD: Front: 100mm, Rear: 110mm
- Gears: Singlespeed freewheel
- Type: Tube only
- Size: 26-inch
$279.99
- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes
- Black Ops MX1100 hubs with sealed bearings and laced with DT spokes
- 24mm inner rim width supports a variety of modern sizes
- OLD: Front: 100mm, Rear: 110mm
- Gears: Singlespeed freewheel
- Type: Tube only
- Size: 29-inch
$10.00
Designed to conform to the center channel and bead locking rim bed, Boyd tubeless tape creates an air-tight seal between the tire and rim bed.
- Not as stiff as a lot of the other options, which makes installation a breeze!
$11.00
Designed to conform to the center channel and bead locking rim bed, Boyd tubeless tape creates an air-tight seal between the tire and rim bed.
- Not as stiff as a lot of the other options, which makes installation a breeze!
$13.00
Designed to conform to the center channel and bead locking rim bed, Boyd tubeless tape creates an air-tight seal between the tire and rim bed.
- Not as stiff as a lot of the other options, which makes installation a breeze!
$15.00
- Designed to conform to the center channel and bead locking rim bed, Boyd tubeless tape creates an air-tight seal between the tire and rim bed.
- Not as stiff as a lot of the other options, which makes installation a breeze!
$18.00 - $30.00
The square bottom on the rubber, plus the rubber extending down the valve helps create the best airtight sealing system. Set up is a breeze and works much better than other valves on the market.
- 44mm valve for 28mm carbon, Altamont, Altamont, CCC, and MTB wheels
- 60mm valve for 44mm carbon and 36mm depths (36 Road Disc, Pinnacle, and Jocassee)
- 80mm valve for 55 Road Disc and 60mm carbon
- 110mm valve for 90mm carbon and 90 Road Disc
- Weights for the valve (with nut for tightening) is: 44mm—5g, 55mm—5g, 60mm—6g, 80mm—6g, 110mm—8g
$200.00
- GVL stands for gravel, and Greenville, SC where Boyd wheels are handbuilt.
- Prologue series wheels are built Skyuka hubs featuring 10-degree engagement and Abec 3 sealed cartridge bearings.
- Built with Pillar TB2018 round double butted spokes and external brass nipples, the Prologue is built to be a great budget upgrade that can be ridden hard in even the most demanding conditions.
$200.00
- A long time favorite, the Rouleur is back as part of the Prologue Alloy Series. A great upgrade over a heavy stock OEM wheel, the Rouleur offers a modern 19mm wide internal / 25mm wide external tubeless rim bed.
- The Skyuka hub features 10 degree engagement, a centerlock design, and Abec 3 sealed cartridge bearings.
- Built with Pillar TB2018 spokes and external brass nipples, the Rouleur is a great budget upgrade that can be used for everyday riding.
- Handbuilt in Greenville, SC to be worry free, durable, and yet quite a bit lighter than what came on most bikes.
$200.00
- A great upgrade over a heavy stock OEM wheel, the Rouleur Disc offers a modern 21mm wide tubeless rim bed.
- All Prologue series wheels are built on Skyuka hubs featuring 10-degree engagement and Abec 3 sealed cartridge bearings.
- The Skyuka disc brake rear hub is available in a Shimano Hyperglide and Sram XDR freehub body and requires no tools to swap between the different freehub body standards.
- Built with Pillar TB2018 spokes and external brass nipples, the Rouleur is a great budget upgrade that can be used for everyday riding.
$212.50
- The Stumphouse is a bombproof MTB wheelset with a modern 30mm wide tubeless rim.
- Stout lacing of 32 spokes front and rear means your only worry is making sure you have enough time to ride.
- All Prologue series wheels are built on Skyuka hubs featuring 10-degree engagement and Abec 3 sealed cartridge bearings.
- The Skyuka MTB rear hub is available with a Shimano Hyperglide, Microspline or Sram XDR freehub body and requires no tools to swap between the different freehub body standards.
- Built with Pillar TB2018 round double butted spokes and external brass nipples, the Stumphouse is a great budget upgrade that can be used for everyday trail riding.
$225.00
- GVL stands for gravel, and Greenville, SC where Boyd wheels are handbuilt.
- Prologue series wheels are built Skyuka hubs featuring 10-degree engagement and Abec 3 sealed cartridge bearings.
- Built with Pillar TB2018 round double butted spokes and external brass nipples, the Prologue is built to be a great budget upgrade that can be ridden hard in even the most demanding conditions.
$225.00
- A long time favorite, the Rouleur is back as part of the Prologue Alloy Series. A great upgrade over a heavy stock OEM wheel, the Rouleur offers a modern 19mm wide internal / 25mm wide external tubeless rim bed.
- The Skyuka hub features 10 degree engagement, a centerlock design, and Abec 3 sealed cartridge bearings.
- Built with Pillar TB2018 spokes and external brass nipples, the Rouleur is a great budget upgrade that can be used for everyday riding.
- Handbuilt in Greenville, SC to be worry free, durable, and yet quite a bit lighter than what came on most bikes.
Page 1 of 22
Next page