Steel 1mm spacer fits Shimano cassette bodies - Great for 10 sp cass on 8/9 sp hubs - Also for many other fit applications
Standard replacement star nuts for threadless steerers.
$5.99 - $11.99
Chrome plated heat treated bolt - Forged steel conical wedge - For 1-inch steer tubes
- Anti chain-suck device - Allows the front derailleur to be adjusted for strong downshifts - If not using front derailleur the device can act as a chain guide
Threaded headset keyed locknut washer - Bag of 10
- Machined AL6061 alloy construction - Center sleeve for use with Revolvr outboard bottom brackets - Converts 68/73mm outboard bottom bracket to a 100mm or 120mm fat bike model - Seals and protects the bearings from harmful contaminants - Center sleeve only: Revolvr outboard bottom brackets sold separately
- Anodized or powder coated finish - Allows for secure clamping - Forged aluminum construction - 34.9mm clamp diameter
Integrated spacer and top cap for use with star nuts and standard alloy steerer tubes - Provides a clean and lightweight stem cap solution - 6061-T6 alloy cap with 7075 alloy bolt
Forged AL6061-T6 alloy construction with CNC groove design - Machined insert for even clamping force - For use with carbon seat posts - Ultra-lightweight
Expanding replacement bar end caps with hex bolt - Reflective silver graphics - Universal sizing fits most bar styles including Road and MTB - 18.2mm OD
- Expanding replacement bar end plugs with hex bolt - Anodized alloy end caps - Compatible with most handlebar styles - 18.2mm OD expander/25.5mm OD end cap
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.
$12.79 - $15.19
Origin-8's Pro Cable Guide Pulley fulfills all your special cable routing needs. Designed to clamp onto seat tube, it allows you to route your cable for bottom pull front derailleurs. Uses a sealed bearing pulley.
Nylon fiber OS adapters are designed for use in frames with worn-out, oversized bottom bracket shells - Replaces standard nylon fiber overmolds found on Origin8 Revolvr BB30 and PF30 outboard thread-together bottom brackets - Use BB30 OS adapters with Origin8 Revolvr BB30 outboard thread-together bottom brackets 211051 and 211052 - Use PF30 OS adapters with Origin8 Revolvr PF30 outboard thread-together bottom brackets 211053 and 211054 - Requires a special installation/removal tool (P/N# 610817) - Shell: 68/73mm x 42~42.1mm - Interface: BB30 - Cup Material: Nylon Fiber
Nylon fiber OS adapters are designed for use in frames with worn-out, oversized bottom bracket shells - Replaces standard nylon fiber overmolds found on Origin8 Revolvr BB30 and PF30 outboard thread-together bottom brackets - Use BB30 OS adapters with Origin8 Revolvr BB30 outboard thread-together bottom brackets 211051 and 211052 - Use PF30 OS adapters with Origin8 Revolvr PF30 outboard thread-together bottom brackets 211053 and 211054 - Requires a special installation/removal tool (P/N# 610817) - Shell: 68/73mm x 46~46.1mm - Interface: PF30 - Cup Material: Nylon Fiber
- CNC-machined chromoly steel lockrings - 1.29" x 24tpi LH
• Fits 3/8" Axles • Lightweight, compact design • Forged aluminum construction • Chromoly bolt
Lightweight aluminum alloy - Non-Keyed - Height: 20mm - 10 to a bag
- Push-in replacement CNC alloy bar end plugs - MTB-specific design - Anodized alloy end caps - Compatible with most handlebar styles - 20mm OD plug/25mm OD end cap (Road) - 20mm OD plug/30mm OD end cap (MTB)
- Replaces existing top cap, and allows the use of a bottle cap as a decorative cover - Compatible with both twist off and crimped style bottle caps - Bottle cap is held in place by two strong magnets - Easy to switch out bottle caps - AL6061 alloy cap and AL7075 alloy bolt
- AL6061-T6 alloy seatpost clamp with CNC-machined cut-outs - Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts - 29.8mm for 27.2mm seatpost and chromoly frame - 31.8mm for 27.2mm seatpost and aluminum frame - 34.9mm for 30.9mm seatpost and aluminum frame, or 31.6mm seatpost and carbon frame - 16mm height
Origin-8's Grip N Seal QR Seat Clamp is forged from light and durable aluminum and features a rubber weather seal and an anodized finish to prevent corrosion. Its high-leverage quick-release lever makes it easy to raise/lower your seat.
- AL6061 alloy construction - Non-keyed design - Jar of 10 spacers
• Converts Braze-on front Derailleurs to clamp on • Lightweight forged alloy • Weight: 28g
- AL6061-T6 alloy seatpost clamp - Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts - 28.6mm for 25.4mm seat post and steel frame - 29.8mm for 27.2mm seat post and chromoly frame - 31.8mm for 27.2mm seat post and aluminum frame - 34.9mm for 30.9mm seat post and aluminum frame, or 31.6mm seat post and carbon frame - 16mm height
Converts braze-on front derailleurs to clamp-on. Available in multiple clamp diameters.
Is your seat post just a hair too small for your frame? Origin-8's Multi-Fit Seat Post Shim is a great solution. • Multi-Fit • Aluminum • 25.4mm internal diameter • 28.0mm outer diameter
• Emergency universal replacement derailleur hanger • CNC machined aluminum construction • Anodized and laser etched finish
Replacement brake hoods for Origin8 Pro Force road levers
Replacement brake hoods for Origin8 Classique Sport road levers
Page 1 of 2 Next page