Riser

- Full UD carbon construction - Textured surface at bar clamp and grip areas - 35mm oversized clamp diameter - 800mm width - 7° back sweep - 5° upsweep - ISO-Mountain safety certified - 225g

- Full UD carbon construction - Textured surface at bar clamp and grip areas - 35mm oversized clamp diameter - 800mm width - 7° back sweep - 5° upsweep - ISO-Mountain safety certified - 225g

- Full UD carbon construction - 31.8mm clamp diameter - 9-degree back sweep - EN-Mountain safety certification - Upsweep / Drop: 4-degree - Back Sweep / Bend: 9-degree - 200g

Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. Thomson's MTB Carbon Cross Country Handlebar is a flat bar with an off center clamp area allowing a flat riding position and reversible for a 5mm drop. It also has 8° of backsweep for comfort and 730mm in width for plenty of leverage. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation

Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. The MTB Carbon Trail Handlebar is built for strength with enough flex built in for all day comfort. It’s strong enough for all mountain/trail riding and light enough for racing. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation

Proven shape, proven width, proven materials, and the artistic touch of Troy Lee Designs: voilà, the TRUVATIV CoLab TLD Carbon riser bars. These bars are stiff, tough, dependable, and give you all the comfort and positive steering feel you want. This is art on your bars for artistry in the corners. - Stiff, precise, and width-optimized for enduro, trail and aggressive xc - Carbon fiber perfection - DESCENDANT geometry from their best enduro rider’s input - Signature Troy Lee Designs style

The WCS Carbon Logic-E Rizer bar ties together Ritchey's historic mountain biking heritage with the demands of today's modern electronic drivetrains. Designed to accommodate the internal routing of Shimano EW-SD50 wires for either Shimano Di2 or STEPS systems, this bar is built to be light and compliant for incredible durability and a supple, refined ride. The WCS Carbon Logic-E Rizer is the choice for XC riders looking for a high-end carbon eMTB bar that's built for performance. The WCS Carbon Logic-E Rizer features Ritchey's proven WCS carbon technology in a 15mm-rise bar with a textured stem clamp area to reduce the risk of bar slippage. - Material: carbon fiber - Width: 780mm (cutting not recommended) - Rise: 15mm - Backsweep: 9° - Upsweep: 3° - Clamp diameter: 31.8mm - Bar-end compatible: no - Weight: 175g - Electronic compatibility: Shimano Di2 / STEPS (Shimano EW-SD50 cable—internal routing) - For proper assembly, stems with open faceplates are required, such as the Ritchey C220 Trail.

Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. - Material: Carbon Fiber - Weight: 200g (25mm rise); 190g (7mm rise) - Bar Width (Max): 780mm - Bar Width (Min): 740mm - Clamp Diameter: 31.8mm - Sweep: 9 Degrees - Tip: 5 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm

An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine. - Material: Carbon - Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise) - Bar Width (Max): 800mm - Bar Width (Min): 780mm - Clamp Diameter: 35mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm

A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep. - Material: Carbon - Weight: 245g (30mm rise); 265g (50mm rise) - Bar Width (Max): 810mm - Bar Width (Min): 780mm - Clamp Diameter: 31.8mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm

Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse… - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - Gold Standard of DH is now wider and stronger - 820mm width for maximum control

- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep

The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio

XC riding is changing – Bikes, trails and riders are all progressing and pushing boundaries. Our new Next SL bar was designed to reduce rider fatigue without compromising handling. This bar allows good vertical flex for comfort, while also eliminating bad horizontal flex to improve steering precision.

Race Face set an industry benchmark with the its Sixc product group - light and strong carbon DH rated crank and bar. Building on the unprecedented success of their proprietary Carbon Technology program, SIXC rewrites the rules in the 6-8 inch travel bike world. SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a bar for the aggressive rider who demands the ultimate in performance. Strong enough for DH, yet light enough to not hold you back on the pedal up to that new trail you have been hearing so much about, SIXC blows up the limits of carbon performance. - SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight - Minimum bar width of 28" or 710mm at indicated cut marks - Reinforced clamping zones for lock-on grip - Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers

Ideal for dialing in fit on bikes with tall front ends, the 2x Flat bar can be mounted with positive or negative 5mm rise to achieve the ideal riding position. Constructed of HMF UD carbon, the 2x Flat bar is perfect for race-worthy weight savings on any XC rig. - Carbon monocoque construction - Rise: +/- 5mm - Width: 710mm - Not bar end compatible - Matte UD finish - 183g

- Light enough for XC, but strong enough for Enduro and Trail - Carbon composite construction - Reinforced and textured clamping areas, with markers for accurate shortening - 5/8 degree with +10mm setback

Mountain bike terrain is bigger and burlier than ever, so why shouldn’t your components be? Our Guide 35.0 Carbon handlebar increases front-end strength and stiffness for more precise handling inputs. The carbon fiber construction keeps weight to a minimum and soaks up trail chatter. Pair these carbon mountain bike handlebars with our Guide Trail 35.0 Stem and carve, drop, pump, and jump your way down the mountain with confidence. - Bar Clamp Diameter: 35.0mm - Color: Carbon - Width: 760/800mm - Rise: 10/20/40mm - Back Sweep (deg): 8 degree - Upsweep: 5 degree - Material: Carbon

Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead. - Signature 11° back sweep, 6° up sweep, 20mm rise - 800mm and 750mm width options - Graduated lines for easy trimming - 31.8mm clamp diameter with 160mm width for use with Salsa Anything Cradle and aerobars - Weight: 221g - Note: Rustler bars are not compatible with bar ends

A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9-degree backsweep and 5-degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength-to-weight ratio - Base Handlebar uses 6061 aluminum

Whatever your adventure, Salsa's Salt Flat Handlebars are lightweight, comfortable, and durable. Whether you are racing, riding laps at your local track, or exploring new trail for the first time, grab hold and let’r rip! - Signature 11° back sweep, 6° up sweep, zero rise - 800mm and 750mm width options - Graduated ends for easy trimming - 31.8mm clamp diameter with 100mm width for use with Salsa Anything Cradle and aerobars - Weight: 189g - Note: Salt Flat bars are not compatible with bar ends

Thomson MTB Aluminum Handlebar 800mm 35mm Rise 9degree back 5 degree up 35.0 clamp. - Produced from 7050 alloy then butted and tapered for optimal fatigue life - Produced with an advanced hydraulic forming press to ensure consistent wall thickness and exact tolerances - Bar Clamp Diameter: 35.0mm

Wide, smart and strong, Thomson's Aluminum Handlebars love ripping trails as much as you. With a low rise and proper sweep, you get plenty of stability and control on even the sketchiest terrain. They're made of tough 7050 aluminum and hydraulically press formed for consistent thickness and tolerance, especially in tapered sections of the bar, which means you get exceptional quality and strength. With a 90mm middle section on the downhill bars, using a wide-set, direct-mount stem is no problem. On top of all that, these lightweight bars have the beautiful, subtle, all-black Thomson look.

Thomson's Trail bar is 750mm wide with 20mm of rise. The clamping area is 50mm wide, allowing a different bend profile for a more compliant ride. The Trail bar is designed to give you a lightweight aluminum all-around bar no matter your riding style. - Backsweep: 8° - Upsweep: 5° - Material: Aluminum

The SL-K Riser Bar is the ultimate mix of light weight and strength for a handlebar that is designed for all types of riding. Its CSI (Carbon Structural Integration) construction marries the best of both worlds of carbon and aluminum. The carbon helps keep the vibration to a minimum, while the aluminum core maintains a majority of the strength. The SL-K handlebar is XC weight-matched with Enduro strength. With a solid 740mm width and 18mm rise, this bar will help with a perfect fit, great control, and peak performance for even the most demanding rider in mind. - UD carbon and AL6066 material - Carbon Structural Integration (CSI) - Textured stem clamp zone - 18mm rise - 9° backsweep, 4° upsweep - UD carbon finish

Origin-8's Classique CargoUnit is a fine 6061 T6-aluminum riser handlebar with a built-in basket. It's the answer to bolt-on baskets and bags that are often unstable. Because the basket is integrated into the bar, your gear rides on a secure, sturdy platform with room for groceries, a gym bag, and a couple burritos. The CargoUnit has a heavy-duty powder-coat finish, too.

A traditional looking 4-piece bar that uses larger radius bends, thicker walled, butted tubing and a traditional 7/8" crossbar for strength and durability. - Multi-Butted, traditional 7/8" crossbar for strength - Large radius bends for greater durability - Welded end caps to reduce flex - Post-weld heat-treated for added strength

A25 Alloy Riser Bar - Cut marks provide a range of width options - Textured Grit Grip finish in clamp areas eliminates over-tightening of components

Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair. - Includes Rockshox sticker pack to give fork and handlebar a unified custom look - Stiff, precise and wide - Signature Troy Lee Designs style - Geometry and 7050 aluminum are designed for DH and gravity events - Back Sweep (deg): 9 - Upsweep: 5 - Weight: 349g - Material: Aluminum

- AL7050-T6 tubular alloy construction - 35mm oversized clamp diameter - 800mm width - 7°/8° back sweep (Depending on rise dimension) - 5° upsweep - ISO-Mountain safety certified - 290-335g (Depending on rise dimension)