$29.99 - $64.99
Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.
Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Compatible with 4mm or 5mm housings
$13.99 - $14.99
Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.
Replacement line kit for SRAM and Avid hydraulic disc brakes. - For Level Ultimate/Level TLM (A1), 2018+ CODE R/RSC (B1) - 2000mm, black
The Jagwire Pro Shift kit is a great way to upgrade from OEM cables and housing. Slick polished cables reduce friction and deliver long lasting performance, and continuously lubricated Slick-Lube liners provide precise cable movement. - Pro Slick Polished inner cables reduce friction and have no coating to wear off - Continuously lubricated LEX-SL linear-strand provides consistent, compressionless performance - Inner cables, housing, and small parts necessary for installation on a road or mountain bike are included - Includes longer cables and extra housing for compatibility with most large frames and bikes with continuous housing - Available in a wide range of colors to match Jagwire Pro Brake and Hydraulic Hose kits - Single-ended SRAM/Shimano compatible cable ends are weld-cut for easy installation
Jagwire's Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of shift cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in Gold and Silver so they also add a little style to your bike. - Each Bottle contains 500 tips
$9.99 - $65.99
Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.
- Replacement link wire for cantilever brakes
Jagwire's Lined End Caps are nice ferrules designed for the ends of shift cable housing sections. They feature a small nylon extension on the end that helps reduce friction and adds protection for coated cables, too. You get a bottle of 50 for all your bicycle setup needs.
- Teflon-coated stainless steel inner wire - Includes cable, housing, ferrules, and cable tips - Cable length: 2100mm - Housing length: 1800mm - Use: Front or Rear - Length: 2100mm - Diameter: 1.5mm - Style: BMX/MTB
- Replaces steel stranded cables and housing with advanced ultralight materials - Shaves 25 grams off for a full 1700mm length - Includes necessary parts for LEV and LEV Integra
- Galvanized steel inner wire - Standard 5mm S.I.S. housing - Front or Rear - Mountain or road
Frame-mounted barrel adjusters allow cable tension to be easily fine tuned. - Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch - Bag of 10
$21.99 - $25.99
Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.
$44.99 - $47.99
With more disc brake platforms on the market than ever before, fitting hydraulic hoses can be complex and frustrating. That’s why we developed the Quick-Fit Hydraulic Hose adapter system, a foolproof approach utilizing proven caliper-adapter technology from the motorcycle world. Pro universal hoses makes it safe and easy to dial in a perfect fit. Simply select a Pro hydraulic hose and match it with a compatible Mountain Pro Quick-Fit adapter kit. It’s that easy. Pro Hydraulic Hoses come in a wide array of colors. Pro Quick-Fit adapter kits are available separately in convenient packaging for the most popular brake manufacturers and models. - A Kevlar weave surrounding the liner prevents bulges due to heat buildup and extreme pressure - Each hose has 2 caliper-side universal couplers that connect to the Quick-Fit Adapters (sold separately) - Mountain Pro hydraulic hose kits are available in 12 colors and finishes - Black kits contain gloss black housing with silver logos; Stealth Black kits have matte black housing featuring black logos
$5.49 - $13.49
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
$11.99 - $15.99
Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers. - Allow the easy installation of Jagwire hose with Shimano disc brakes - Kits contain enough hardware for both front and rear brakes - Requires Jagwire Mountain Pro Universal Disc Brake Hose Kit for installation Compatibility - HFA312: Shimano XTR M975, Deore XT M775, SLX M665, LX T665 and M585, Hone M601, Deore T615, M595, M535 and M525, Alfine S500 and S501, Metrea U5000, Alivio M4050, Acera M3050, and Non-Series T605, MT500, M575, M486, M485, M446, M445, M395, M365, and M355 - HFA314: Shimano Dura Ace R9120, R9170, R9180 and Ultegra R8020, R8070
Jagwire 1x Pro Shift kits deliver enhanced performance and style to any bike with a single-chainring drivetrain. A Pro Polished Slick Stainless cable and the Slick-Lube housing liner provide an upgrade over OEM cable systems, with enhanced shifting precision and long-lasting performance. The 1x Pro Shift kit is designed to work with nearly all frames and 1x shifting systems, including most internally-geared hubs. And with small parts included for both road and mountain systems, this kit is quick and easy to install. 1x Pro Shift kits are offered in 10 colors to match Jagwire's Pro Brake and Hydraulic Hose kits. - The Pro Polished Slick cable combined with a Slick-Lube liner offer enhanced shifting precision and long-lasting performance - All parts are included for a complete 1x shift cable and housing installation on either a road or a mountain bike - The kit contains an extra-long inner cable and ample housing for large frames or a continuous housing run - 1x kits are perfect for bikes with only a rear derailleur or an internally geared hub - Black kits contain gloss black housing with silver logos; Stealth Black kits have matte black housing featuring black logos What's Included: - 1x 2200mm LEX-SL Shift Housing - 1x 2800mm Pro Polished Slick Shift Inner Cable - 2x Sealed Alloy End Caps - 4x Lined Alloy End Caps - 1x Hooded Alloy End Cap - 1x Cable Tip - 1x 5G Tube Top - 3x Cable Donuts - 1x Rotating Hook
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.
Jagwire's Alloy Straddle Cable Carrier w/Liner is a nice upgrade for your cantilever brakes. It's made of light and durable aluminum and has a liner for smooth action.
A great replacement for OE cables and a perfect way to bring style to a bike, our Universal Sport Brake Kits make it easy. They come with double-ended Slick Stainless cables compatible with SRAM and Shimano road and mountain systems. Our new and improved Slick-Lube liners reduce friction, providing improved shifting precision and long-lasting performance. - Double-ended brake cables are compatible with both mountain and road brakes - Sport Slick Stainless cables combined with Slick-Lube housing liners offer dependable braking performance and durability - All parts needed for a complete brake cable/housing install are included - OEM-level cables and housing with high-quality small parts
$4.99 - $10.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
$2.99 - $3.99
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters
$69.90 - $79.90
- Housing features the Jet Lube Process, which injects the proper amount of grease from end to end and results in 10 percent less cable drag - Lead and Dioxin free - Made in Japan
Hooded end caps offer the greatest level of protection against contamination and are ideal for high contamination environments. - Rubber seal for areas that need the most protection - Alloy body
$149.90 - $202.93
- All Yokozuna cables have High-grade raw materials, flexibility, strength, tight construction and excellent quality control - Premium Stainless steel for greater durability - Standard cables are High strength die-drawn steel cable with proprietary SN56 plating that exhibits corrosion resistance superior to a zinc galvanized cable - Made in Japan
SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
$3.50 - $3.99
- Fits cantilever brakes - Sold individually
- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables - 5mm ID for use with most braking cables - 100-count bottle