Parts

Zero25 is a lightweight, universal seatpost with a twist: it's two seatposts in one. The two clever, reversible saddle rail clamps transform the post from zero saddle setback to 25mm setback. All that's needed is to flip the clamps from one side of the seatpost head to the other and the offset changes. No more problems with getting the wrong seatpost or needing another one when you change the type of saddle you use—it now takes 30 seconds to transform your seatpost. And, the best news is that, despite the double functionality, the Zero25 is even lighter than our previous seatpost. Zero25 can handle any type of seatpost rails, including round rails and oval-shaped carbon rails.

- Replacement bar donuts for cobrafist pogies

Replacement bar end plug for 45NRTH Cobrafist pogies

45NRTH's Replacement Pedal Pins are a great way to customize the style and grip of your 45NRTH pedals (sold separately). These tough, aluminum pins deliver fantastic bite into traditional winter boots, and come in a variety of colors to coordinate with your rig. Plus, the included wrench keeps the job quick. - Includes: 32 pins and wrench

Super hardened steel designed for high torque Singlespeed and BMX use.

- Aheadset preload adjusting bolt

All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm

• Classic track grips • 175mm length

Snap-on brake cable guides for bikes that don't have any. - Steel cable housing guide for 1-1/8" top tubes - Snaps on; no bolts - Set of 3 clamps

Tired of losing your bar end plugs? Seeking a more secure solution that also venerates your favorite little bike company from Minneapolis? Well, boy howdy do we have just the thing...

The All-City Master Dropout is a sliding dropout system consisting of replaceable dropout plates and fixing hardware. Designed for use with 12mm thru-axles and flat-mount brakes, it is compatible only with select All-City models. - Allows riders to convert from a geared to single-speed setup or vice-versa - Compatible only with select All-City models - No additional chain tension adjustment required - Non-Drive Side, use with multi-speed and single-speed setups - Plate and fixing hardware included - Compatible with Flat Mount disc brakes

- Chromoly steel with black oxide finish - 1.37" x 24tpi right hand thread - Requires a cog lockring (sold separately) - Compatible with 1/8-inch chains

All-City Singlespeed Disc Brake Adaptor 

Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp. - Laser-etched All-City logo - Aluminum body with stainless steel hardware

Thick, cushioned silicone tape provides durable all-weather grip and confidence. Includes locking handlebar plugs.

The All-City Master Dropout is a sliding dropout system consisting of replaceable dropout plates and fixing hardware. Designed for use with 12mm thru-axles and flat-mount brakes, it is compatible only with select All-City models. - Allows riders to convert from a geared to single-speed setup or vice-versa - Compatible only with select All-City models - No additional chain tension adjustment required - Drive Side, for single-speed set-ups - Plate and fixing hardware included - Compatible with 12mm thru-axle

Doubles represent the ultimate in toe strap comfort and performance. You won't believe how much more secure and comfortable they are than traditional singles until you've tried them yourself. Suddenly toe clips will make perfect sense, and you'll be riding with newfound confidence. - Leather with steel hardware - Intended for use with double-strap toe clips (sold separately) - 114 grams per pair - 420mm length

612 Track rings are the perfect compliment to any 144mm B.C.D. crankset. They are made from 7000 series aluminum and feature a lovely and durable anodized finish. - BCD: 144 - Chain Compatibility: 1/2-inch x 1/8-inch

The All-City Master Dropout is a sliding dropout system consisting of replaceable dropout plates and fixing hardware. Designed for use with 12mm thru-axles and flat-mount brakes, it is compatible only with select All-City models. - Allows riders to convert from a geared to single-speed setup or vice-versa - Compatible only with select All-City models - No additional chain tension adjustment required - Threaded cap / nut for axle installation - Cap nut and O-ring included - Use with drive-side plates

The Pursuit Special is All-City's addition to the pantheon of high end track chainrings. They were designed in house by track racers for track racers and are optimized for weight, stiffness, and engagement. These beauties are cnc’d in the USA and utilize a proprietary tooth profile for smooth and quiet operation. The 49-52’s utilize a solid body design with reliefs in the back for weight savings, while the 46-48’s have full cutouts. In sticking with the theme of their aluminum track bike, the Thunderdome, All-City named these rings after Mad Max’s car, the Pursuit Special. - Material: 7000 Series Aluminum - Ring Position/Type: Single

The beautiful Big Block track fork is available in both 1-inch and 1-1/8-inch sizes. Lugged crown, matching tips, straight blades, and looks that will make your heart melt. It’s the perfect replacement fork for nearly any track bike. - Material: Full 4130 High Quality Chromoly tapered fork blades, lugged crown, and matching dropouts - Axle to Crown Length: 375mm - Offset: 32mm - Steerer Tube Length: 300mm - Spacing: 100mm - Tire Clearance: 32c - Brake Mount (Fork): mid reach caliper (47mm - 57mm)

Featuring All-City’s first fully custom lugged crown, the versatile, cross-inspired Super Professional Fork is right at home on mixed terrain. Designed to provide a fast, agile, and responsive ride, it offers durable steel construction, crown and mid-blade rack mounts for a rack and fenders, 45mm rake, compatibility with flat-mount brakes, and clearance for 700c x 45mm or 650b x 47mm tires. The entire fork is E.D. dipped for rust proofing, with a nice black powdercoat over everything. - Steel construction, lugged crown - Crown and mid-blade rack mounts - 45mm rake - Accommodates 12mm thru-axle and flat-mount brakes - Max tire clearance 700c x 45mm or 650b x 47mm - Thru-Axle included

Answer's Alumilite handlebars provide ample width and rise to fit a 25.4mm stem clamp size. - Weight: 325g - Upsweep: 4° - Backsweep: 8°

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

Bolt on Avid's Rim Wrangler 2 Brake Pads for excellent stopping power. The cartridge design makes it easy to switch pads when they wear out. They're designed for use with linear-pull brakes.

Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- Includes stainless bolts - Fits 160mm front and 140mm rear rotors

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid's Front 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the front of your bike. Kits include mounting bolts and post mount spacers for front brake installation.

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

Avid's Rear 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the back of your bike. Kits include mounting bolts and a 30mm post mount spacer for rear brake installation.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Bolt on Avid's Shorty Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

Bolt on Avid's Shorty Ultimate Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g

Cost effective stopping power from the leader in cable-actuated disc brakes. - For use with short cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Rotor Included: No - Weight: 215 g

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

For the ultimate light-weight brake setup, Avid ditched the concentric caliper-centering washers and gave you titanium bolts to save precious grams. This kit includes ultra-light titanium hardware for standard (direct-mount) mounting.

Smooth, controlled braking is yours with Avid's HS1 Rotor. It utilizes cross-drilled technology to dissipate heat, save weight, and give you a consistent feel at the lever and predictable speed control in all conditions.

The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with short cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No - Weight: 204 g

Essential parts to properly service and maintain all Avid CODE brakes. - Replacement parts for 2011-2016 CODE brakes - Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote for maximum convenience and ease of use.

For the stop/start world of cyclocross, Avid makes the inimitable Shorty Ultimate Rim Brake. The ideal balance of power, control and weight, the Ultimates are the choice of pro crossers across the globe. They offer an open design that clears mud quickly while also dishing out serious stopping power and modulation. Just a twist of the in-line cable adjustment knob lets you dial in cable tension, and you can choose between a wide or narrow stance for increased mud clearance or power. And, the Shorty uses standard road cartridge pads for easy maintenance.

This high-end version of the BB7 has a durable anodized finish and titanium hardware, as well as lighter brake pads. - For use with short cable-pull levers - Includes aluminum-backed organic pads - For use with short cable-pull levers - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No - Weight: 184 g

Disc brake power, rim brake weights — at 170-grams per caliper Avid's BB7 Road SL brakes pack a punch in a flyweight package. Used with your road-style, drop bar levers, they provide precision actuation as well as tool-free pad wear adjustment and replacement. Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds for powerful braking with positive modulation in any condition. Plus titanium mounting and rotor bolts shave even more grams on this great disc setup.

- Cold forged, CNC-machined cartridge body with self-aligning pivoting posts - Triple-compound 70mm pads

- CNC-machined 6061-T6 aluminum with rounded tooth profile to reduce chain wear

- Cold-forged, CNC-machined 6061-T6 aluminum with built-in return spring - Clamp integrates with ODI Lock-On grips - 50g

- Cold-forged 6061-T6 aluminum arms, available in 85mm or 108mm - Precision sealed bearing pivots, titanium and stainless steel hardware - Flexible cable noodle and streamlined cable fixing point - 35 millimeters of vertical brake pad adjustment

- Soft foam grip donuts prevent thumb blisters from riding gloveless - Intended for use with flanged BMX grips to prevent rubbing and irritation

- Allows the use of two separate cables running from detangler to brake for more precise adjustment and better feel - Attaches to rear cable guide and routes two cables around seat post