Accessories

A fully-featured trunk bag with organizer pockets, dividers, and multiple expandable compartments and a top mount bungee system, allowing you to have as much or as little storage as you require for each journey. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - Water-resistant stitched construction - Lightweight, universal Velcro attachment system attaches to the top of rack. - Padded/insulated construction controls internal temperature and keeps load quiet. - Main compartment expands vertically for an additional 2.9L / 177 cu/in. - Side pockets expand to provide an additional 5.8L / 254 cu/in. - Top bungee system for additional, flexible storage. - External rear zippered pocket. - Internal mesh pocket in lid. - Internal organizer pocket. - Adjustable internal divider. - Ultra-visible three-way 3M triangle logos + extra 3M reflective stripe. - Ultra-stiff Polypropylene backing plates built into fold-down pockets. - Rear light clips. - Carry handle. - Mini pump straps. - Shoulder strap included. - Rain cover available separately.

A full-featured, waterproof urban-inspired pannier that overcomes limitations normally found with waterproof bags. Offers exceptional external load flexibility, a removeable internal organizer for a laptop, and a convenient external access zippered pocket for keys and/or phone. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Rixen & Kaul VARIO 2 spring-loaded hooks immediately adjust from 6mm-16mm, without any need for tools. - Rixen & Kaul lower SLIDE-LOCK and FLIP-LOCK hold panniers firmly in place. - Intuitive waterproof roll-down closure system. - Removeable 14.2-inches x10.2-inches padded laptop/electronics sleeve/organizer. - External zippered pocket for keys/wallet, etc... - Keychain clip + Axiom keychain. - Compression/cargo straps provide exceptional load control and allow gear to be carried outside of the main cavity. Ideal for unplanned loads faced by commuters. - Strap control loops to protect against strap damage if straps are not secured. - Single daisy-chain tie-down strip for additional load attachment. - Ultra-visible three-way 3M triangle logos. - Ultra-stiff Polypropylene backing plate. - Front and rear light clips. - Carry handle. - D-Rings built in to hook attachment points for additional luggage tie-down, or for attaching your own shoulder strap. - Volume 22.6L / 1379 cu/in - Weight 935g / 2.06 lbs (incl. laptop sleeve and tablet sleeve) – (800g / 1.76 lbs without sleeve) - Dimensions 47x28.5x13.5cm / 18.5-inches x11.25-inches x5.25-inches - Pannier sold individually

A set of no-nonsense panniers for the everyday commuter. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. - Volume 35 L / 2139 cu in (pair) - Weight 1240g / 2.73 lbs (pair) - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner on back-plate protects contents from scratches and improves internal visibility - Daisy-chain webbing for additional tie-down options - Rixen & Kaul VARIO 1 hooks are adjustable from 6mm-16mm - The Rixen and Kaul lower SLIDE-LOCK rail and FLIP-LOCK hold panniers firmly in place - Drawstring closure helps to manage load - Mesh side pocket with elastic closure - Zippered rear pocket - Mesh front pocket with elastic closure - Daisy-chain webbing loops provide additional tie-down points - 3M triangle rear logo - Ultra-stiff polyurethane backing plate - LED light clip

A waterproof, dry-bag-inspired / urban-inspired pannier set that overcomes limitations normally found with waterproof bags. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Rixen & Kaul VARIO 2 spring-loaded hooks immediately adjust from 6mm-16mm, without any need for tools. - Rixen & Kaul lower SLIDE-LOCK and FLIP-LOCK hold panniers firmly in place. - Triple webbing tie-downs allow variable size/shape loads to be carried outside of the main cavity. Ideal for attaching U-locks. - Intuitive waterproof roll-down closure system. - Ultra-visible three-way 3M triangle logos. - Ultra-stiff Polypropylene backing plate. - Front and rear light clips. - Carry handles. - D-Rings built in to hook attachment points for additional luggage tie-down, or for attaching your own shoulder strap. - Volume 31.6L / 1928 cu/in (pair) (15.8L / 964 cu/in each bag) - Weight 1320g / 2.91 lbs (pair) - (660g / 1.46 lbs each bag) - Dimensions 39x27x15cm / 15.4-inches x10.6-inches x5.9-inches (each bag)

A waterproof, dry-bag-inspired / urban-inspired pannier set that overcomes limitations normally found with waterproof bags. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Rixen & Kaul VARIO 2 spring-loaded hooks immediately adjust from 6mm-16mm, without any need for tools. - Rixen & Kaul lower SLIDE-LOCK and FLIP-LOCK hold panniers firmly in place. - Triple webbing tie-downs allow variable size/shape loads to be carried outside of the main cavity. Ideal for attaching U-locks. - Intuitive waterproof roll-down closure system. - Ultra-visible three-way 3M triangle logos. - Ultra-stiff Polypropylene backing plate. - Front and rear light clips. - Carry handles. - D-Rings built in to hook attachment points for additional luggage tie-down, or for attaching your own shoulder strap. - Volume 45.2L / 2755 cu/in (pair) (22.6L / 1378 cu/in each bag) - Weight 1530g / 3.37 lbs (pair) - (765g / 1.69 lbs each bag) - Dimensions 43x30x17.5cm / 16.9-inches x11.8-inches x6.9-inches (each bag)

Made with high quality motocross vinyl, these palettes fit the UCI-approved cycling races. Available in all the colors that are authorized by the various sanctioning bodies. FEATURES - Hook & Loop Straps - Velcro Frame Mount - 3D Compression Vinyl - UCI / USABMX Approved SPECIFICATIONS - Material Vinyl - Dimensions Fits All Frames - Process 3D Stamping - Weight 2.4 oz

Adjusting chain tension is quick and easy with the new Box Three™ Chain Tensioner. With a single-hole "lollipop" design, these tensioners reduce weight and help keep your rear wheel locked in place. Features: - New and Improved - 20mm of Adjustment - Single Axle Position - Slotted for Dropout - ED Black Hardware - Anodized Finish Specs: - Axle Size 10mm (3/8") only - Material 6061-T6 Aluminum - Hardware - Stainless Steel

Designed by the infamous Rich Lee, the Box Two plates are injected in an impact-resistant and colorfast resin. The airflow ports are artfully sculpted to both reduce weight and drag. Each plate includes hook-and-loop closures secured in place with custom Box rivets. Did you know that these stylish creations are also the official number plate of the UCI/GSX Super Cross Series?

Designed by the infamous Rich Lee, the Box Two plates are injected in an impact-resistant and colorfast resin. The airflow ports are artfully sculpted to both reduce weight and drag. Each plate includes hook-and-loop closures secured in place with custom Box rivets. Did you know that these stylish creations are also the official number plate of the UCI/GSX Super Cross Series? FEATURES - Hook & Loop Velcro Straps - Steel Rivets - Replaceable Number Pallet SPECIFICATIONS - Size: Small // Large - Dimensions: 6.5 x 9 inches (Small) // 8.25 x 9.5 inches (Large) - Weight: 84 g / 2.96 oz (Small) // 95 g / 3.35 oz

Box One Chain Tensioners are extruded then CNC-machined from 7075 aluminum for an optimal balance of strength and weight. A minimalist design adds style while reducing their overall mass. Laser-etched graphics include wheel position guides and two 10mm mounting holes with 15mm of adjustment to ensure perfect adjustability. Fits most frames every time you remove and replace your wheel. When used correctly, Box One tensioners will protect your frame dropouts and hold your rear wheel in place. Keep in mind. However, they aren’t indestructible (neither are your dropouts). Install these lightweight chain tensioners with care and leave the 15-inch breaker bar in your toolbox. Features: - New and Improved - 45mm of Adjustment - XO Skeleton Design - Dual-Sided Adjustment Grid - Dual-Color Adjustment Block Specs: - Axle Size: 10mm (3/8") only - Material: 7075-T6 Aluminum - Hardware: Stainless Steel

This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions. - Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside - Includes: plastic cage, Allen key, screws and washers - Fits and encloses up to an average 20oz bottle and has enough room for a heat pack - Extended zipper pull for easy open close while riding with winter gloves - Reflective material on logo

A neoprene pogie designed to allow riders to change positions from hoods to drops without removing hands from the mitts. Internal or external cable routing options. - Water-proof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars and can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands

A neoprene pogie designed to work with flat or riser style handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Vent zipper can be opened if hands start to overheat - Measures 10" wide by shifters/brakes

A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands

A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands

A neoprene pogie designed to work with drop handlebars fitted with integrated shift/brake levers with externally routed shift cables and housing. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Opening measures 8.5" across

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Measures 11" wide by shifters/brakes

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with drop bar style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Opening measures 9" across

- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only) - Compatible with luggage carriers from 80 up to 150 mm - -01: carrier plate for rear racks that are not MIK ready. - -02: adapter plate for bicycle rear bags that are not MIK ready - Suitable for e-bikes - Max load: 26lbs/12kg

- Stylish bike accessory for your bike through beautiful bohemian print. - Makes a resounding ding dong sound.

- The Basil Buddy Space Frame can be used in combination with the Basil Buddy Dog Bicycle Basket. - This wire dome is made from hard-wearing steel and prevents your dog from jumping free of their basket while you’re out riding. - This wire dome comes in classic black. - Provides complete protection for your dog and total peace of mind for pet owners when out cycling.

- Fits lengthwise on the luggage carrier of your bike. - Easily attached with supplied mounting hardware. - Ideal for carrying shopping, daily essentials or school supplies. - Weatherproof with a reinforced frame. - Classic black color.

- Water-repellent polyester, velcro mounting - Main compartment: inner mesh pocket, smartphone touchable pouch, opening for ear buds, raincover - 1L

The MIK Carrier Plate is ideal for cyclists who are looking to upgrade their frame to accommodate the MIK system. This carrier plate allows you to attach any accessory fitted with an MIK adapter to your luggage carrier in as little as one second. You’ve a wide range of accessories to consider, including panniers and baskets with ample storage. Once fitted with MIK system components, it’s as simple as clicking your preferred storage item or accessory into place. Please note, bikes already fitted with integrated MIK systems including carrier plate needn’t worry about upgrading their bicycle with this accessory. This MIK Carrier Plate is suitable for luggage racks with a width of 100-170mm. Features: - The MIK Carrier Plate is suitable for bicycle baskets and panniers from Basil. - Attach at the rear luggage carrier of conventional and electric bike frames. - The MIK Carrier Plate is designed for use with accessories that have been fitted with MIK Adapter Plates.

- Equipped with detachable top pocket with touchable window for your mobile phone - Two side pockets with their own inner pocket - Easy to attach by means of Velcro

- Rear basket, steel, mesh - Also fit for carrier racks with raised or lowered front/backside, compatible with many E-bikes carrier racks - Permanent mounting with patented WSL-system, easy assembly, adjustable in width and length (included)

- Double bag, of water-repellent polyester - Closing with buckles - Topside with two bands for LED/straps/child’s seat/spring clamp - Double reflective stripes on all sides - Integrated mounting system